Self Priming Pumps

Centrifugal and Diaphragm self priming pumps
with Lombardini and Lister Petter air cooled diesel engine drive

A versatile range of diesel engine powered pumps from 1½'' to 8'' able to handle fresh, potable and salt laden water with and without solids as well as diesel fuel. Flow from 340 to 10000 litres/minute: Heads from 7.5 to 70 metres.

Hawk 1½'' - Centrifugal, High Head

The Hawk 1½ centrifugal pump is ideal for supplying clean water to sprinkler systems, or for fire fighting. Although constructed of cast iron and mounted in a tubular frame, it is a very portable unit. Optional hose and trolley kits available.

Kestrel 2'' - Centrifugal, Thermoplastic, General Purpose

The Kestrel 2'' Centrifugal pump is designed for the transfer of potable or salt water, chemicals or fertilizers. It is constructed from glass reinforced polycarbonate with stainless steel fixings for strength and durability to produce a very lightweight and simple to use set. Options include hose and trolley kits.

Merlin 2'' & 3'' - Centrifugal, Cast Iron, General Purpose

The Merlin centrifugal general purpose portable pump handles both potable and seawater as well as other compatible liquids. Cast iron casing and wearing parts with integral non-return valve. Merlin 251 is mounted in a steel roll frame with anti-vibration mounts; Merlin 351 is on a fabricated steel baseplate. Many options available such as site trolleys, electric start, hose and spares kits.

Gannet 2'', 3'' & 4'' - Centrifugal, Trash Duty

The Gannet trash duty pumps for solids handling and water laden sewage. All are constructed of aluminium with cast iron wearing parts. The Gannet 251, 351 and DLO75 are mounted in a full tubular frames; the Gannet 451 is mounted on a robust steel baseplate. They have easy impeller chamber clean out features, carbide long life mechanical seals and are supplied with course suction hose filters. Many options available such as site trolleys, tailers, hose and spares kits.

Swallow, Falcon and Osprey 1½'' to 6'' - Centrifugal, Cast Iron, General Purpose

The Swallow, Falcon and Osprey range of 1½'' to 6'' centrifugal pumps are a family of heavy duty cast iron pumps for dewatering - fresh and seawater, chemical handling, raw water supply etc. They are all mounted as standard on robust fabricated steel baseplate, and have screwed male inlet and outlet except the Osprey 6 series which has 150mm PN16 drilled flanges. Many options available such as electric or hand start, site trolleys, trailers, quick make/break couplings, hose and spares kits.

Fulmar 4'' to 8'' - Silent, Centrifugal, Cast Iron, General Purpose

The Fulmar range of centrifugal pumps are silent, heavy duty high capacity cast iron pumps for dewatering – fresh and seawater, chemical handling, raw water supply etc. They are all mounted as standard on robust fabricated steel baseplate and incorporate a acoustic weatherproof engine canopy designed to reduce the noise level down to no more than 76 dBA at 7 metres. The inlet and outlet is fitted with PN16 flanges, except the Fulmar 463WES which has screwed BSP male fittings There are many options available such as road trailers, lever lock quick make/break couplings, hose and spares kits.

Pelican 2'', 3'' & 4'' - Diaphragm, Solids Handling

The Pelican diaphragm pump is ideal for handling dirty water including sludge and raw sewage or any other compatible fluid containing abrasives or large solids in suspension, indefinite dry running with rapid priming. There are no seals or rotating parts in contact with fluid. Very simple and occasional maintenance is required. The Pelican 251 & 351 are of aluminium construction with thermoplastic diaphragm mounted on site trolley; the Pelican DLO 100 has cast iron wetted parts with neoprene diaphagm mounted on site trailer. Options available include hose and spares kits.

Condor - Centrifugal, High Head

The Condor centrifugal pump is designed for pressure transfer of clean/potable water or for fire fighting. It is constructed of cast iron with a high efficiency enclosed impeller and integral non return valve, shaft running in 2 anti-friction bearings for rigidity and long life. The Condor 4.353E & 4.323RE are open units, Condor 4.372ES has a weatherproof/acoustic engine canopy designed to reduce the noise level to no more than 76 dBA at 7 m. Many options are available such as site trolleys, trailers, quick make/break couplings, hose and spares kits.

Swallow, Falcon and Osprey DF 1½'' 2'' 3'' & 4'' - Centrifugal, Fuel Transfer

The Swallow, Falcon & Osprey DF range are developed to handle diesel fuels and similar products with a flash point of more than 35°C. [NOT FOR PUMPING PETROLEUM]. The pumps are of cast iron construction with all rubber components in ‘Viton’ and screwed BSPP 60° cone male suction and discharge connections with blanking caps and chains. The engine is fitted with a spark arrestor. Options available include automatic over speed shutdown, tubular frame, site trolley, hose and spares kits.

Other Pumps: In addition to the self priming range of diesel engine driven units described on this page, we can supply many other types such as:

Petrol engine driven self priming 2'' and 3''

Kestrel 102 2'' Pump with Briggs & Stratton 4 hp 'Vangard' Engine Max. Head: 38m Max Flow: 600 l/m

Portable General Purpose Dewatering Spraying Wash down

Centrifugal non-priming single stage end suction pumps with outputs up to 16000 litres/minute and delivery heads up to 180 metres powered by Lombardini, Lister Petter, Perkins or Volvo Penta diesel engines

Swift HLD150-125-400 6” x 5” Pump with Perkins 1006TG2A water cooled engine Max. Head: 90 m Max. Flow: 5800 l/m

Fire Fighting Irrigation Water Distribution Cooling Towers Fresh & Seawater

Submersible de-watering/de-sludging pump kits with dedicated generating set

Well Cleaning Sewage Farm Effluent Process Wastes

Heron SH-2QTP 2” Submersible pump with Venom TP50-MS 5 kVA dedicated generating set powered by a Lombardini 15LD400 diesel engine, with standard accessories and spare parts for autonomous operation. Max. Head: 20 m Max. Flow: 650 l/m Solids up to 50 mm

Individual data sheets on each model available on request.

FREE ADVICE SERVICE

We can also built bespoke diesel engine driven pump sets for customer’s individual requirements and supply associated equipment to do with fluid handling and storage.

Atalanta Pumps – ‘Manufactured for life’

PumpSets Ltd. Meon Hill Farm Ind. Est. Salisbury Road, Stockbridge
Hampshire, SO20 6HA, England
Tel: (44) 1264 811094   Fax: (44) 1264 811095
email: enquiries@pumpsets.com

©2010 Pumpsets Ltd